Mitsubishi q64rd User Manual page 64

4 SETUP AND PROCEDURES BEFORE OPERATION
4.2 Setup and Procedures before Operation
4
4 - 2
Start
Module mounting
Mount the Q64RD/Q64RD-G in the specified
slot.
Wiring
Wire external devices to the Q64RD/Q64RD-G.
Intelligent function module switch settings
Perform settings using GX Developer
(see Section 4.5).
Use the user range settings?
Use the user range settings
Offset/gain setting
If the user settings are used, perform the
offset and gain settings (see Section 4.6).
Use the utility package?
YES
Initial setting and auto refresh setting
The program can be simplified if the utility
package is used for setting (see Chapter 5).
Programming and debugging
Create and check the sequence program.
Use the factory default.
NO
MELSEC-Q
4 - 2