Table of Contents
Advertisement
5 UTILITY PACKAGE (GX Configurator-TI)
3)
QCPU
Q25HCPU
MODE.
RUN.
ERR.
USER.
BAT.
BOOT.
A
USB
RS-232
Figure 5.1 Correlation chart for data created with the utility package
5 - 8
(b) Steps 1) to 3) shown in Figure 5.1 are performed as follows:
1) From GX Developer, select:
[Project]
2) On the intelligent function module selection screen of the utility, select:
[Intelligent function module parameter]
parameters]
3) From GX Developer, select:
[Online]
module parameters"
Alternatively, from the intelligent function module selection screen of the
utility, select:
[Online]
<Text files>
(a) A text file can be created by clicking the Make text file button on the initial
setting, Auto refresh setting, or Monitor/Test screen. The text files can be
utilized to create user documents.
GX Developer
/GX Configurator-TI
Project
1)
A
2)
[Open project] / [Save]/ [Save as]
[Read from PLC] / [Write to PLC]
[Read from PLC] / [Write to PLC]
Disk
Project
A
B
A: Intelligent function module parameters
B: Data saved by "Make text file"
MELSEC-Q
[Open parameters] / [Save
"Intelligent function
Personal computer
5 - 8
Advertisement
Table of Contents
Troubleshooting
