Temperature Verification; Temperature Verification With The 24-Bottle Rack; Temperature Verification With The Bottle Locating Base - Teledyne 5800 Installation And Operation Manual

Isco 5800 Refrigerated Sampler
Section 5 Maintenance
5.3 Temperature
Verification
Figure 5-4 Temperature verification with the 24-bottle rack (rear view)
Figure 5-5

Temperature verification with the bottle locating base

5-14
Should there be a need to verify the temperature readings
displayed by the control panel, it is important to read the
temperature as close as possible to the sensor inside the
refrigerator.
To verify the temperature without a 24-bottle rack or locating
base, place the refrigerator thermometer in the back-right corner
of the refrigerator. The thermometer should sit in front of the
return air opening to the refrigeration system, but not obstruct
the air flow.
To verify the temperature with the 24-bottle rack, place the
refrigerator thermometer on the rack near bottles 20 and 21
(Figure 5-4). For samplers with the bottle locating base, place the
refrigerator thermometer between bottles three and four
(Figure 5-5).
The refrigerator thermometer can be read after 30 minutes and
compared with the displayed refrigerator temperature (section
5.2.8).