5.2.13 Analog Input
SELECT DIAG: (<-->)
ANALOG INPUT
ANALOG CURRENT:
__._ mA
The ANALOG INPUT diagnostic displays the 4-20 mA current
loop input to the sampler. This diagnostic tool is helpful when
troubleshooting an analog input from a flow measurement
device.
When you start this test, the sampler will display the current
reading until you press the Stop or Enter button. There is no
pass or fail.
To display the analog input current:
1. Select the ANALOG INPUT option and press Enter.
2. The display shows the current reading until you press the
Stop or Enter button.
Isco 5800 Refrigerated Sampler
Section 5 Maintenance
5-13