Pause Or Stop A Running Program; Post Sampling Activities; View The Log - Teledyne 5800 Installation And Operation Manual

4.2 Pause or Stop a
Running Program
4.3 Post Sampling
Activities

4.3.1 View the Log

Press Stop to pause a running program. The sampler will
display:
The top line of the display shows a five minute count down timer.
I f n o b u t t o n s a r e p r e s s e d , t h e s a m p l e r p r o g r a m w i l l
automatically resume when the count reaches 0:00.
While paused, you can:
• View the log (see Section 4.3.1)
• Collect a Grab Sample (see Section 4.4)
• Halt the program — Press the Next or Previous arrows
to select the HALT option. Then, press the Enter button.
• Resume the program — Press the Next or Previous
arrows to select the RESUME IN M:SS option. Then,
press Enter. Or, you can press Stop to exit the paused
state and resume the program.
During the pause, you can reset the countdown timer to five
minutes by pressing the Number, Next, or Previous arrows.
Note
While paused, the sampler skips sample events that would
have occurred otherwise. These are reported in the Log as
MISSED SAMPLES (number): PROGRAM PAUSED.
Post-sampling activities include:
• Viewing the Log (Section 4.3.1)
• Retrieving the Refrigerator Temperature Log
(Section 4.3.2)
• Removing the sample bottles (Section 4.3.4)
The sampler records events during the running program and
summarizes them in a log. This log is held in the sampler
memory until the next program is started.
To view the log after the completion of a program, press the Stop
or Enter button to return to the Main menu. Then, press the
arrow buttons to select the VIEW LOG option and press Enter.
Select whether you want to view the current run or previous run.
You can also view the log while a program is paused.
While viewing the log, you can:
• Step forward through the screens by pressing the Next
arrow or Enter.
• Step backward by pressing the Previous arrow.
Isco 5800 Refrigerated Sampler
Section 4 Operation
RESUME IN MM:SS
VIEW LOG HALT
4-3