2.10 Configuring and
Programming the
Sampler
2.11 Locking the Sampler
To complete the installation, the sampler software should be
configured and programmed. Refer to Section 3 for instructions.
Configure the sampler to make sure that it "knows" what bottle
configuration is installed, the length of the suction line, etc.
Program the sampler to specify how and when the sampler
should collect liquid samples.
Locking the sampler is an optional step that can prevent
tampering with the sampler operation or collected samples.
To prevent tampering with the sampler operation, the sampler
has a PROGRAM LOCK. When enabled, this software feature
requires a numeric password to access most of the control panel
functions. Refer to Section 3.3.11 to enable this option.
To prevent tampering with the collected samples, place a padlock
on the refrigerator door latch, control panel, and pump cover.
Isco 5800 Refrigerated Sampler
Section 2 Installation
2-21