Chapter 6 Mold Setups; Mold Setup Screen - Husky Altanium Delta3 User Manual

User Guide

Chapter 6 Mold Setups

A mold setup contains the process parameters required by Altanium to operate the hot
runner system for that particular mold. On the Home screen, touch the Mold Setup button
to open the Mold Setup screen. This screen can also be accessed from any screen by
touching the Mold Setup Info button in the system footer.
6.1

Mold Setup Screen

The Mold Setup screen is used to store and manage files such as mold setups, images,
documents and reports. Files are organized in a tree structure and are stored in mold, system
and user folders. Each mold folder allows the storage of mold setups, images and documents
associated with that specific mold. The screen is divided into two panes. The left side
contains all directories that are on the systems local hard drive and the right side displays all
available directories and files from an external source, such as a USB disk or a network file
share.
Figure 6-1 Mold Setup Screen
Mold Setup Screen
v 2.3 — September 2015 Mold Setups
51