Add User - Kyocera FS-C2026MFP Operation Manual

Deleting a user
Enabling/Disabling Group Authentication
This enables group authentication using the LDAP server. This menu can be used only when [Netwk Authentic.]
is selected as the user authentication method. For details of LDAP server settings, refer to the Operation Guide
of the LDAP server.
Use the procedure below to enable group authentication.
NOTE:
Refer to Character Entry Method on Appendix-7 for details on entering characters.
NOTE:
You can configure detail settings of group authentication in COMMAND CENTER. For details, refer to
the KYOCERA COMMAND CENTER Operation Guide.
Downloaded From ManualsPrinter.com Manuals
Local User List: a b
l DeviceAdmin
l Admin
*********************
l User1
[ Menu
Menu:
Detail/Edit
1
Delete
2
*********************

Add User

3
User Login Set.: a b
User Login
1
*********************
Local User List
2
Group Auth.
3
[ Exit
5
The overwrite confirmation screen appears.
Press [Yes] (the Left Select key). The user
information is changed and the screen returns to
Local User List.
1
Press the
to delete, and then press [Menu] (the Right Select
key).
]
2
Press the
a b
press the OK key.
3
In the delete confirmation screen, press [Yes] (the
Left Select key). The user is deleted and the
screen returns to Local User List.
1
See the procedure for displaying user control on
page 11-2, and display the User/Job Account.
2
Press the
3
Press the OK key. The User Login Set. menu
appears.
]
11-10
Management
or key to select the user you want
or key to select [Delete] and then
or key to select [User Login Set.].