Connecting Cables - Kyocera FS-C2026MFP Operation Manual

Hide thumbs Also See for FS-C2026MFP:
Table of Contents

Advertisement

Connecting Cables

Follow the steps below to connect cables to the machine.
Downloaded From ManualsPrinter.com Manuals
Off
On
1
2
1
If the machine power is on, press the power key on
the operation panel and make sure that the
message displayed and memory light are off.
Then, press the main power switch to turn off the
power.
2
Connect the machine to the PC or your network
device. When using the network interface, remove
the cap.
3
Remove the Power Cord Connector Cover.
2-5
Preparation before Use
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs-c2126mfp

Table of Contents