Subnet Mask - Kyocera FS-C2026MFP Operation Manual

Downloaded From ManualsPrinter.com Manuals
IPv4 Setting:
IP Address
3

Subnet Mask

4
Default Gateway
5
*********************
[ Exit
Default Gateway: a b
123.145.167.189
Press the
horizontally.
Press the
the Subnet Mask. Each 3 digits can be set between
000 and 255.
IMPORTANT: When the DHCP Setting (page 2-14) is
[On], the current Subnet Mask is displayed and cannot
be changed.
When setting an Subnet Mask, set the DHCP Setting
(page 2-14) to Off.
28
Press the OK key. Completed. is displayed and the
screen returns to the IPv4 Setting menu.
29
Press the
a b
]
30
Press the OK key. Default Gateway appears.
31
Use the arrow keys to enter the Default Gateway.
Press the
horizontally.
Press the
the Default Gateway. Each 3 digits can be set
between 000 and 255.
IMPORTANT: When the DHCP Setting (page 2-14) is
[On], the current Default Gateway is displayed and
cannot be changed.
When setting an Default Gateway, set the DHCP
Setting (page 2-14) to Off.
32
Press the OK key. Completed. is displayed and the
screen returns to the IPv4 Setting menu.
2-21
Preparation before Use
or key to move the cursor position
or key or the numeric keys to enter
or key to select [Default Gateway].
or key to move the cursor position
or key or the numeric keys to enter
2