Kyocera FS-C2026MFP Operation Manual page 131

Downloaded From ManualsPrinter.com Manuals
Ready to send.
Dest.:
p :sally@kyoceramitaN
1-sided 300x300dpi
[ Duplex ] [ScanRes.]
Dest. Confirm.:
p Morgan@kyoceramitaN
*********************
p aaaaaaaaa@kyoceramN
p bbbbbbbbb@kyoceramN
[ Add ] [ Exit
4 Enter the destination e-mail address.
Destination can be specified using the
NOTE:
Address Book or the One-touch keys. Refer to
Specifying Destination on page 3-44.
5 Press the OK key. Completed. is displayed and the
screen returns to the basic screen.
1
If the screen for confirming the entry of a new
NOTE:
destination (page 8-72) is set to [On], a screen to
confirm the entered e-mail address appears. Enter the
same e-mail address again and press the OK key.
6 If there are additional destinations, press the
Confirm/Add Destination key. Repeat steps 2 to
5 to enter additional destinations. Up to 100
destinations can be specified.
Press [Exit] (the Right Select key) to return to the
basic screen.
Press the Confirm/Add Destination key to
a b
confirm or delete the registered destinations.
Press the
press the OK key. Then, you can edit or delete the
destination.
]
Press [Exit] (the Right Select key) to return to the
basic screen.
7 Press the Start key. Transmission starts.
If the screen for confirming the destination
NOTE:
before transmission (page 8-72) is set to [On], the
Confirm Destination screen appears when the Start
key is pressed. For more information, refer to Confirm
Destination Screen on page 3-43.
3-27
Basic Operation
or key to select a destination and
3