Kyocera FS-C2026MFP Operation Manual page 363

MC (Main charger output setting)
This sets the output of the main charger. When print quality has deteriorated, the output of the main charger
can be changed to restore print quality.
This menu only appears when the Altitude Adj. (Altitude adjustment setting) on page 8-114 is set to
NOTE:
[Normal].
Use the procedure below to set the main charger output setting.
Downloaded From ManualsPrinter.com Manuals
Service Setting: a b
Service Status
1
*********************
Network Status
2
Test Page
3
[ Exit
Altitude Adj.:
1 *Normal
*********************
High 1
2
High 2
3
Sys. Menu/Count.:a b
Document Box
;
Edit Destination
<
Adjust/Maint.
=
*********************
[ Exit
Adjust/Maint.:
Copy Denst. Adj.
1
*********************
Send/Box Density
2
AutoColorCorrect
3
[ Exit
Press the OK key. The Service Setting menu
4
appears.
]
5 Press the
Press the OK key. Altitude Adj. appears.
6
a b
7 Press the
or [High 2].
Press the OK key. Completed. is displayed and the
8
screen returns to the Adjust/Maint. menu.
In the Sys. Menu/Count. menu, press the
1
key to select [Adjust/Maint.].
]
Press the OK key. The Adjust/Maint. menu
2
a b
appears.
]
3 Press the
8-115
Default Setting (System Menu)
or key to select [Altitude Adj.].
or key to select [Normal], [High 1]
or key to select [Service Setting].
8
or