Kyocera FS-C2026MFP Operation Manual page 490

Removing the Memory Module
Verifying the expanded memory
Optional Function
You can use the optional applications installed on this machine.
Overview of the Applications
The applications listed below are installed on this machine.
You can use these applications for a limited period on a trial basis.
• UG-33 (ThinPrint) (This application can only be activated in Europe.)
This application allows print data to be printed directly without a print driver.
Restrictions such as the number of times the application can be used during the trial period differ
NOTE:
depending on the application.
Downloaded From ManualsPrinter.com Manuals
Sys. Menu/Count.:a b
Report
1
Counter
2
System
3
*********************
[ Exit
With the memory connection terminal pointing
5
toward the socket, align the cut-out part with the
socket terminal and insert directly in at an angle.
Before inserting a memory module in the
CAUTION:
machine, make sure that the machine is switched off.
6 Carefully press the inserted memory down and into
the machine.
Reinstall the inner and right cover.
7
To remove a memory module, remove the right cover
and the memory slot cover from the machine. Then,
carefully push out the two socket clamps. Ease the
memory module out of the socket to remove.
To verify that the memory module is working properly,
test it by printing a status page.
In the Sys. Menu/Count. menu, press the
1
key to select [System], and press the OK key.
]
Appendix-4
or