Add User - Kyocera FS-C2026MFP Operation Manual

Deleting a user
Local User List: a b
l DeviceAdmin
l Admin
*********************
l User1
Menu:
Detail/Edit
1
Delete
2
*********************

Add User

3
Enabling/Disabling Group Authentication
This enables group authentication using the LDAP server. This menu can be used only when [Netwk Authentic.]
is selected as the user authentication method. For details of LDAP server settings, refer to the Operation Guide
of the LDAP server.
Use the procedure below to enable group authentication.
NOTE:
Refer to Character Entry Method on Appendix-7 for details on entering characters.
NOTE:
You can configure detail settings of group authentication in COMMAND CENTER. For details, refer to
the KYOCERA COMMAND CENTER Operation Guide.
User Login Set.: a b
User Login
1
*********************
Local User List
2
Group Auth.
3
5
1
[ Menu ]
2
a b
3
1
2
3
[ Exit ]
11-10
The overwrite confirmation screen appears.
Press [Yes] (the Left Select key). The user
information is changed and the screen returns to
Local User List.
Press the or key to select the user you want
to delete, and then press [Menu] (the Right Select
key).
Press the or key to select [Delete] and then
press the OK key.
In the delete confirmation screen, press [Yes] (the
Left Select key). The user is deleted and the
screen returns to Local User List.
See the procedure for displaying user control on
page 11-2, and display the User/Job Account.
Press the or key to select [User Login Set.].
Press the OK key. The User Login Set. menu
appears.
Management