Kyocera FS-C2026MFP Operation Manual page 135

Downloaded From ManualsPrinter.com Manuals
Dest. Confirm.:
p Morgan@kyoceramitaN
b 0667640000
*********************
b 0667741234
[ Add ] [ Exit
Dest. Confirm.:
OSAKA SD
*********************
[ Add ] [ Exit
12 Press [Yes] (the Left Select key). This makes a
a b
connection with the entered destination.
]
If the connection is successful, Connected. is
displayed on the screen. Press [OK] (the Right
Select key). Completed. is displayed and the
screen returns to the basic screen.
If the connection failed, Cannot connect. is
displayed. Press [OK] (the Right Select key). The
screen shown in step 3 reappears. Check and re-
enter the destination.
If there are additional destinations, press the Add
13
Destination key. Repeat steps 2 to 12 to enter
additional destinations. Up to 100 destinations can
be specified.
14 Press the Confirm/Add Destination key to
a b
confirm the registered destinations.
Press the
press the OK key. Then, you can edit or delete the
destination.
]
Press [Exit] (the Right Select key) to return to the
basic screen.
15 Press the Start key. Transmission starts.
If the screen for confirming the destination
NOTE:
before transmission (page 8-72) is set to [On], the
Confirm Destination screen appears when the Start
key is pressed. For more information, refer to Confirm
Destination Screen on page 3-43.
3-31
Basic Operation
or key to select a destination and
3