Performance Tests - Keysight N5224A Service Manual

Tests and Adjustments

Performance Tests

Performance Tests
The performance tests verify the electrical performance of your PNA. These performance tests are included
in the analyzer's firmware with Option 897 and Option 898. Your analyzer is automatically configured for
each individual test.
The model numbers of the equipment used by these performance tests are specified under
Service Test Equipment" on page
There are nine tests in the Option 897 or 898 performance test package:
• Source Power Accuracy Test
• Source Maximum Power Output Test
• Source Power Linearity Test
• Frequency Accuracy Test
• Trace Noise Test
• Receiver Compression Test
• Noise Floor Test
• Calibration Coefficients Test
• Dynamic Accuracy Test
3-28
2-5.
PNA Series Microwave Network Analyzers
N5224A and N5225A
"Required
Service Guide N5225-90001