Ansi/Ncsl Z540.3-2006 And Iso/Iec 17025 Verification - Keysight N5224A Service Manual

Tests and Adjustments PNA Series Microwave Network Analyzers
ANSI/NCSL Z540.3–2006 and ISO/IEC 17025 Verification N5224A and N5225A
ANSI/NCSL Z540.3–2006 and ISO/IEC 17025 Verification
To meet the criteria for ANSI/NCSL Z540.3–2006 and ISO/IEC 17025, perform the preliminary checks and all
1
performance tests without stopping to repair or adjust . Refer to Figure 3-1 for test flow. Print data at the
completion of all the tests, even if you are aware that the analyzer did not pass. If there is a failure, complete
the verification before you troubleshoot, repair, and adjust. After the failure has been corrected, repeat the
entire set of performance tests and generate a new set of data.
Figure 3-1 ANSI/NCSL Z540.3–2006 and ISO/IEC 17025 Verification Flowchart
1. Stop only in case of a catastrophic failure or cable connector damage
3-8 Service Guide N5225-90001