Bottom Hardware And Miscellaneous Parts - Keysight N5224A Service Manual

Replaceable Parts
Replaceable Parts Listings

Bottom Hardware and Miscellaneous Parts

Reference
Designator Part Number
①
0515-1227
➁
0515-2994
③
N5245-00017
④
0515-0430
➄
0515-0372
⑥
0515-2007
➆
08490-60039
⑧
N5245-20002
➈
0515-0374
⑩
0515-0667
N5245-20125
11
N5245-00023
N5224-00002
12
0515-0664
13
N5225-00001
14
15 0515-1602
N5245-00024
16
N5245-00022
17
N5245-00015
18
N5227-00001
N5224-00004
19
N5224-00005
5022-1087
20
21 0515-1521
0515-0669
N5245-00011
E4403-20033
not shown N5242-00019
0460-2725
N5242-00029
N5242-00030
6-92
Qty
Description
-- Machine screw, M3.0 x 6, flat head (To attach test set front sub panel.)
-- Machine screw, M3.0 x 0.5, pan head (8 to attach A42–A45 bias tees to their brackets.)
4
Bracket (For A29–A32 test port couplers.)
Machine screw M3.0 x 6 pan head (To attach: A47 & A48 receiver attenuator brackets to
--
test set deck, source attenuator brackets to test set deck.)
Machine screw, M3.0 x 8, pan head (To attach: A23 test set motherboard to test set deck
and stabilizer bracket, stabilizer bracket to A24 IF mux board, A38–A41 source attenuators
to their brackets, A46–A49 receiver attenuators to their
--
attenuator brackets to test set deck, test set deck to chassis, shields to mixer bricks, A25
HMA26.5 to inner bracket, A37 reference mixer switch to its bracket, and coupler plate
assy to test set deck front, bias tee brackets to the chassis.)
-- Machine screw M3.0 x 14 (To attach splitter to top of mixer brick mounting block.)
1
A69 3 dB pad (For A28 mixer brick R4.)
1
Mounting block (For A27 and A28 mixer bricks.)
Machine screw M3.0 x 10 pan head (To attach mixer brick mounting block and receiver
--
coupler mounting brackets; reference mixer switch to test set deck.).
--
Machine screw M3.0 x 20 pan head (To attach mixer bricks to mounting block.)
8
Gap pad (Between each mixer brick and its shield.)
2 Mixer brick shield
1
Test set deck
-- Machine screw (To attach bracket (for semi rigid cables) to test set deck.)
2 Bracket (For A46 port 1 and A49 port 2 receiver attenuators.)
-- Machine screw, M2.0 x 6, flat head (To attach receiver couplers to brackets.)
1
Bracket (For A37 reference mixer switch.)
2
Bracket (For semi rigid cables; only 1 used for 2-port, both used for 4-port.)
6 Bracket (For A47 port 3 & A48 port 4 rcvr attenuators & all src attenuators.)
1 Test set front plate, 2-port models without front panel jumpers
1 Test set front plate, 2-port models with front panel jumpers
1 Test set front plate, all 4-port models
4 Test port coupler dress nut (One for each coupler.)
-- Machine screw, M3.0 x 5, flat head (To attach front panel LED boards.)
-- Machine screw, M4.0 x 0.7, pan head (To attach A24 IF MUX to t. set deck.
4 Bracket (For all bias tees.)
4
Gap pad (Between each coupler and test set front sub panel.)
1 Stabilizer bracket (Between A23 test set motherboard and A24 IF mux board.)
2
Coupler vibration mount (Between port 1 & port 2 couplers & test set front sub panel.)
2 Protective guard for front panel jumpers
2 Protective guard for front panel jumpers (4-port models only.)
PNA Series Microwave Network Analyzers
N5224A and N5225A
brackets, A46 & A49 receiver
Service Guide N5225-90001