IBM power PS700 Problem Determination And Service Manual page 59

Table 15. B700xxxx Licensed internal code SRCs (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v See Chapter 3, "Parts listing, Type 8406," on page 229 to determine which components are CRUs and which
components are FRUs.
B700 xxxx Error Codes
6990
6991
6993
6994
6995
69C2
69C3
69D9
69DA
69DB
BAD1
BAD2
F103
F104
F105
Description
Service processor failure.
System firmware failure
Service processor failure
Service processor failure.
Informational system log entry only.
Informational system log entry only.
Informational system log entry only.
Host Ethernet Adapter (HEA) failure.
Informational system log entry only.
System firmware failure.
The platform firmware detected an
error.
System firmware detected an error.
System firmware failure
Operating system error. System
firmware terminated a partition.
System firmware detected an internal
error
Action
Replace the system-board and chassis
assembly, as described in "Replacing the FRU
system-board and chassis assembly" on page
260.
Go to "Isolating firmware problems" on page
218.
1. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
2. Go to "Isolating firmware problems" on
page 218.
Replace the system-board and chassis
assembly, as described in "Replacing the FRU
system-board and chassis assembly" on page
260.
No corrective action is required.
No corrective action is required.
No corrective action is required.
Replace the system-board and chassis
assembly, as described in "Replacing the FRU
system-board and chassis assembly" on page
260.
No corrective action is required.
1. Collect the platform dump information.
2. Go to "Isolating firmware problems" on
page 218.
Go to "Isolating firmware problems" on page
218.
1. Collect the event log information.
2. Go to "Isolating firmware problems" on
page 218.
1. Collect the event log information.
2. Collect the platform dump information.
3. Go to "Isolating firmware problems" on
page 218.
Check the management-module event log for
partition firmware error codes (especially
BA00F104); then, take the appropriate actions
for those error codes.
1. Collect the event log information.
2. Collect the platform dump information.
3. Go to "Isolating firmware problems" on
page 218.
Chapter 2. Diagnostics
47