IBM power PS700 Problem Determination And Service Manual page 110

Table 19. C2001000 to C20082FF checkpoints (continued)
v If the system hangs on a progress code, follow the suggested actions in the order in which they are listed in
the Action column until the problem is solved. If an action solves the problem, you can stop performing the
remaining actions.
v See Chapter 3, "Parts listing, Type 8406," on page 229 to determine which components are CRUs and which
components are FRUs.
Progress code
C2004100
C2004200
C2004300
C20043FF
C2006000
C2006005
C2006010
C2006020
98
Power Systems: Problem Determination and Service Guide for the IBM Power PS700 (8406-70Y)
Description
Waiting for load source device to enlist
Load source device has enlisted
Preparing connection to load source
device
Load source device is connected
Locating first LID information on the
load source
Clearing all partition main store
Locating next LID information on the
load source
Verifying LID information
Action
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.