IBM power PS700 Problem Determination And Service Manual page 160

Table 25. 101-711 through FFC-725 SRNs (continued)
SRN FFC
2624-xxx 2624
2624-101 2624
2624-102 2624
2624-103 2624
2624-201 cable
network
2624-301 cable
network
2624
2624-701 2624
2624-702 2624
2624-703 2624
2624-704 2624
2624-705 2624
2624-706 2624
2640-121 2640
2640-131 2640
2640-132 2640
2640-133 2640
148
Power Systems: Problem Determination and Service Guide for the IBM Power PS700 (8406-70Y)
Description and Action
Generic reference for 4X PCI-E DDR InfiniBand Host Channel Adapter -
system-board and chassis assembly. Go to "Performing the checkout procedure" on
page 184.
Configuration failure - system-board and chassis assembly. Go to "Performing the
checkout procedure" on page 184.
Queue pair create failure - system-board and chassis assembly. Go to "Performing
the checkout procedure" on page 184.
Loop back test failure - system-board and chassis assembly. Go to "Performing the
checkout procedure" on page 184.
Loop back test failure. Do the following steps one at a time, in order, and rerun the
test after each step:
1. Reseat the cable.
2. Replace the cable.
3. Verify that the network is functional.
4. Verify that the network switch is functional.
Loop back test failure. Do the following steps one at a time, in order, and rerun the
test after each step:
1. Reseat the cable.
2. Replace the cable.
3. Verify that the network is functional.
4. Verify that the network switch is functional.
5. Go to "Performing the checkout procedure" on page 184.
Error Log Analysis indicates that this adapter has failed due to an internal error -
system-board and chassis assembly. Go to "Performing the checkout procedure" on
page 184.
Error Log Analysis indicates that this adapter has failed due to a failure with the
uplink interface used to connect this device to the host processor - system-board and
chassis assembly. Go to "Performing the checkout procedure" on page 184.
Error Log Analysis indicates that this adapter has failed due to a memory error -
system-board and chassis assembly. Go to "Performing the checkout procedure" on
page 184.
Error Log Analysis indicates that this adapter has failed due to a unrecoverable
internal parity error - system-board and chassis assembly. Go to "Performing the
checkout procedure" on page 184.
Error Log Analysis indicates that this adapter has failed due to a internal error -
system-board and chassis assembly. Go to "Performing the checkout procedure" on
page 184.
Error Log Analysis indicates that this adapter has failed due to a memory error -
system-board and chassis assembly. Go to "Performing the checkout procedure" on
page 184.
Physical volume hardware error. Go to "Performing the checkout procedure" on
page 184.
Smart status threshold exceeded. Go to "Performing the checkout procedure" on
page 184.
Command timeouts threshold exceeded. Go to "Performing the checkout procedure"
on page 184.
Command timeout with error condition. Go to "Performing the checkout procedure"
on page 184.