Configuration Procedure - HP 5820X Switch Configuration Manual

Equipment room
B
The network administrator has created two configuration files sys.a.cfg and sys_b.cfg for the switches in
the two rooms. The username and password for accessing the ACS server is vicky and 12345. The URL
address is http://acs.database:9090/acs.

Configuration procedure

Configure the ACS server
1.
ACS server configuration includes the following tasks:
Setting the username and password for accessing the ACS server.
•
Adding information about CPEs and divide CPEs into different groups.
•
Binding configuration files to different CPE groups.
•
Other configurations on the ACS server keep their default value.
# Set a username and password on the ACS server.
Click the System Management tab, and select CPE Authentication Users from the navigation tree to enter
the CPE authentication user configuration page.
Figure 48 CPE authentication user configuration page
Click Add to enter the page for adding a CPE authentication user.
5800 switch
5800-3
5800-4
5800-5
5800-6
133
Serial ID
210235AOLNH12000015
210235AOLNH12000017
210235AOLNH12000020
210235AOLNH12000022