Configuring Attributes Of Netstream Export Data; Configuring Netstream Export Format - HP 5820X Switch Configuration Manual

To do...
7. Configure the destination
address for the NetStream
aggregation data export.
8. Configure the source interface
for NetStream aggregation
data export.
9. Enable the current NetStream
aggregation configuration.
NOTE:
Configurations in NetStream aggregation view apply to aggregation data export only, and those in
•
system view apply to NetStream traditional data export. If configurations in NetStream aggregation
view are not provided, the configurations in system view apply to the aggregation data export.
• The aging of NetStream hardware aggregation entries is exactly the same as the aging of NetStream
traditional data entries.
The NetStream hardware aggregation data export and NetStream traditional data export are
•
mutually exclusive. The hardware aggregation does not take effect if the destination address for
NetStream traditional data export is configured (ip netstream export host in system view).

Configuring attributes of NetStream export data

Configuring NetStream export format

The NetStream export format configures to export NetStream data in version 5 or version 9 formats, and
the data fields can be expanded to contain more information, such as the following information:
Statistics about source AS, destination AS, and peer ASs in version 5 or version 9 export format.
•
Statistics about BGP next hop in version 9 format only.
•
Use the command...
ip netstream export host ip-
address udp-port [ vpn-
instance vpn-instance-name ]
ip netstream export source
interface interface-type
interface-number
enable
204
Remarks
Required.
By default, no destination address is
configured in NetStream aggregation
view. Its default destination address is
that configured in system view, if any.
If you expect to only export NetStream
aggregation data, configure the
destination address in related
aggregation view only.
Optional.
By default, the interface connecting to
the NetStream server is used as the
source interface.
•
Source interfaces in different
aggregation views can be
different.
•
If no source interface is configured
in aggregation view, the source
interface configured in system
view, if any, is used.
•
HP recommends you connect the
network management interface to
the NetStream server.
Required.
Disabled by default.