Outputting system information to the console
Outputting system information to the console
To do...
1.
Enter system view.
2.
Enable information center.
3.
Name the channel with a
specified channel number.
Configure the channel through
4.
which system information can
be output to the console.
5.
Configure the output rules of
system information.
6.
Configure the format of the
time stamp.
Enabling the display of system information on the console
After setting to output system information to the console, you must enable the associated display
function to display the output information on the console.
Follow these steps in user view to enable the display of system information on the console:
To do...
1.
Enable the monitoring of
system information on the
console.
2.
Enable the display of
debugging information on the
console.
3.
Enable the display of log
information on the console.
4.
Enable the display of trap
information on the console.
Use the command...
system-view
info-center enable
info-center channel channel-
number name channel-name
info-center console channel
{ channel-number | channel-
name }
info-center source { module-name
| default } channel { channel-
number | channel-name } [ debug
{ level severity | state state } * |
log { level severity | state state } *
| trap { level severity | state
state } * ] *
info-center timestamp { debugging
| log | trap } { boot | date |
none }
Use the command...
terminal monitor
terminal debugging
terminal logging
terminal trapping
233
Remarks
—
Optional.
Enabled by default.
Optional.
See
Table 9
for default channel
names.
Optional.
By default, system information is
output to the console through
channel 0 (console).
Optional.
See
"Default output rules of
system
information."
Optional.
The time stamp format for log,
trap and debugging information
is date by default.
Remarks
Optional.
Enabled on the console and
disabled on the monitor terminal
by default.
Required.
Disabled by default.
Optional.
Enabled by default.
Optional.
Enabled by default.