Outputting System Information To The Trap Buffer; Outputting System Information To The Log Buffer - HP 5820X Switch Configuration Manual

Outputting system information to the trap buffer

NOTE:
The trap buffer only receives the trap information, and discards the log and debugging information
even if you have configured to output them to the trap buffer.
To do...
Enter system view.
1.
2. Enable information center.
3. Name the channel with a
specified channel number.
4. Configure the channel through
which system information can
be output to the trap buffer
and specify the buffer size.
5. Configure the output rules of
the system information.
6. Configure the format of the
time stamp.

Outputting system information to the log buffer

You can configure the device to output log, trap, and debugging information to the log buffer, but the
log buffer only receives the log and debugging information, and discards the trap information.
To do...
1. Enter system view.
2. Enable information center.
3. Name the channel with a
specified channel number.
Use the command...
system-view
info-center enable
info-center channel channel-
number name channel-name
info-center trapbuffer [ channel
{ channel-number | channel-
name } | size buffersize ] *
info-center source { module-name
| default } channel { channel-
number | channel-name } [ debug
{ level severity | state state } * |
log { level severity | state state } *
| trap { level severity | state
state } * ] *
info-center timestamp { debugging
| log | trap } { boot | date |
none }
Use the command...
system-view
info-center enable
info-center channel channel-
number name channel-name
236
Remarks
—
Optional.
Enabled by default.
Optional.
See Table 9 for default channel
names.
Optional.
By default, system information is
output to the trap buffer through
channel 3 (trapbuffer) and the
default buffer size is 256.
Optional.
See "Default output rules of
system information."
Optional.
The time stamp format for log,
trap and debugging information
is date by default.
Remarks
—
Optional.
Enabled by default.
Optional.
See Table 9 for default channel
names.