HP 5820X Switch Configuration Manual page 211

deny to forward packets without performing NetStream processing.
•
permit to perform NetStream processing.
•
To configure QoS-based NetStream filtering:
To do...
1. Enter system view.
2. Define a class and enter its view.
3. Define a match criterion.
4. Quit the class view.
5. Create a traffic behavior and enter its
view.
6. Configure the NetStream filtering
action for a traffic behavior.
7. Quit the traffic behavior view.
8. Create a policy and enter its view.
9. Specify a behavior for a class in the
policy.
10. Quit the policy view.
Interface-based
VLAN-based
11. Apply a
QoS policy:
Globally
NOTE:
For more information about class, traffic behavior, QoS policy, see
Use the command...
system-view
traffic classifier tcl-name [ operator { and |
or } ]
if-match match-criteria
quit
traffic behavior behavior-name
netstream filter { deny | permit }
quit
qos policy policy-name
classifier tcl-name behavior behavior-name
quit
In Layer 2 Ethernet interface view or Layer 3
Ethernet interface view:
qos apply policy policy-name { inbound |
outbound }
In system view:
qos vlan-policy policy-name vlan vlan-id-list
{ inbound | outbound }
In system view:
qos apply policy policy-name global { inbound
| outbound }
ACL and QoS Configuration Guide
201
Remarks
—
—
—
—
—
Required
—
—
—
—
—
—
—
.