Configuring the DNS server
On the DNS server, you must bind the URL address to the IP address of the ACS server to ensure that
CPEs can obtain the IP address of the ACS through the DNS function.
Configuring the ACS server
An ACS performs auto-configuration of a CPE through remote management. For the primary configurable
parameters, see
server, see the user manual that came with your ACS server.
Configuring CPEs
You can set CWMP parameters at the CLI.
NOTE:
The HP 5800 and 5820X switches operate as CPEs in a CWMP-enabled network, so the following only
describes the configuration on CPEs.
Complete these tasks to configure CWMP:
Task
Enabling CWMP
Configuring the
ACS server
Configuring CPE
attributes
"Configuration parameter
Configuring the ACS URL
Configuring the ACS username and
password
Configuring the CPE username and
password
Configuring the CWMP connection
interface
Configuring the CWMP connection
interface
Configuring the maximum number of
attempts made to retry a connection
Configuring the close-wait timer of the CPE
deployment." For more information on configuring the ACS
Remarks
Required
Required
Optional
Optional
Optional
Optional
Optional
Optional
127