Configuring Dhcp Test Example - HP 5820X Switch Configuration Manual

# Display the history of ICMP echo tests.
[DeviceA] display nqa history admin test
NQA entry (admin admin, tag test) history record(s):
Index
370
369
368
367
366
365
364
363
362
361

Configuring DHCP test example

Network requirements
As shown in
address from the DHCP server (Device B).
Figure 8 Network diagram for DHCP test
Configuration procedure
# Create a DHCP test group and specify interface VLAN-interface 2 to perform NQA DHCP tests.
<DeviceA> system-view
[DeviceA] nqa entry admin test
[DeviceA-nqa-admin-test] type dhcp
[DeviceA-nqa-admin-test-dhcp] operation interface vlan-interface 2
# Enable the saving of history records.
[DeviceA-nqa-admin-test-dhcp] history-record enable
[DeviceA-nqa-admin-test-dhcp] quit
# Start DHCP tests.
[DeviceA] nqa schedule admin test start-time now lifetime forever
# Stop DHCP tests after a period of time.
[DeviceA] undo nqa schedule admin test
# Display the result of the last DHCP test.
[DeviceA] display nqa result admin test
NQA entry (admin admin, tag test) test results:
Send operation times: 1
Min/Max/Average round trip time: 624/624/624
Square-Sum of round trip time: 389376
Response Status
3 Succeeded
3 Succeeded
3 Succeeded
5 Succeeded
3 Succeeded
3 Succeeded
3 Succeeded
2 Succeeded
3 Succeeded
2 Succeeded
Figure 8, configure NQA DHCP tests to test the time required for Device A to obtain an IP
Time
2007-08-23 15:00:01.2
2007-08-23 15:00:01.2
2007-08-23 15:00:01.2
2007-08-23 15:00:01.2
2007-08-23 15:00:01.2
2007-08-23 15:00:01.2
2007-08-23 15:00:01.1
2007-08-23 15:00:01.1
2007-08-23 15:00:01.1
2007-08-23 15:00:01.1
Receive response times: 1
35