Configuring Cluster Management Example - HP 5820X Switch Configuration Manual

To do...
Display the information of
candidate devices
Display the current topology
information
Display the information about
cluster members
Clear NDP statistics

Configuring cluster management example

Network requirements
Three switches form cluster abc, whose management VLAN is VLAN 10. In the cluster, Switch B
•
serves as the management device (Administrator), whose network management interface is VLAN-
interface 2; Switch A and Switch C are the member devices (Member).
All devices in the cluster use the same FTP server and TFTP server on host 63.172.55.1/24, and use
•
the same SNMP NMS and log services on host IP address: 69.172.55.4/24.
Add the device whose MAC address is 000f-e201-0013 to the blacklist.
•
Figure 62 Network diagram for cluster management configuration
Use the command...
display cluster candidates [ mac-
address mac-address | verbose ]
[ | { begin | exclude | include }
regular-expression ]
display cluster current-topology
[ mac-address mac-address [ to-
mac-address mac-address ] |
member-id member-number [ to-
member-id member-number ] ] [ |
{ begin | exclude | include }
regular-expression ]
display cluster members [ member-
number | verbose ] [ | { begin |
exclude | include } regular-
expression ]
reset ndp statistics [ interface
interface-list ]
159
Remarks
Available in user view