Nexcom PEAK 735 Series User Manual page 48

BIOS, and you will be able to see the IDE device status listed in Standard CMOS
Features.
Serial ATA Port O/I Mode
Select a compatible mode for Port 1 and Port 2 from Award Setting to the chipset
settings:
Primary Master: Compatible Mode with Serial ATA Port 1 set to Primary Master
Primary Slave: Compatible Mode with Serial ATA Port 1 set to Primary Slave
Secondary Master: Compatible Mode with Serial ATA Port 1 set to Secondary Master
Secondary Slave: Compatible Mode with Serial ATA Port 1 set to Secondary Slave
Primary Master: Compatible Mode with only Serial ATA Enabled and Port 1 set to Primary
Master
Secondary Master: Compatible Mode with only Serial ATA Enabled and Port 1 set to
SATA 1 Master: Enhance Mode with Port 1 set to Native Mode Master
SATA 2 Master: Enhance Mode with Port 2 set to Native Mode Master
USB Controller
Select Enabled if your system contains a Universal Serial Bus controller and you have
USB peripherals.
USB 2.0 Contoller
If BIOS itself has high speed USB support built in, the support will be automatically turn
on when high speed device is attached.
USB Keyboard Support
Select Enabled if your USB controller is enabled and it needs USB keyboard support
in legacy (old) OS operating systems such as DOS.
Secondary Master
47