Before Accessing The Web User Interface - Panasonic KX-HDV430 Administrator's Manual

1.1.6 Web User Interface Programming

1.1.6.3 Before Accessing the Web User Interface

Recommended Environment
This unit supports the following specifications:
HTTP Version
Authentication Method
The Web user interface will operate correctly in the following environments:
Operating System
Web Browser
Language (recommended)
Opening/Closing the Web Port
To access the Web user interface, you must open the unit's Web port beforehand. For details, refer to the
Operating Instructions on the Panasonic Web site (→ see Introduction).
Configuring Settings from the Unit
To open the unit's Web port
1.
In standby mode, tap
2. Tap "Basic Settings".
3.
Tap or to select "Other Option".
4. Tap "Other Option".
5. Tap "Embedded Web".
6. Select "On", and then tap "OK".
To close the unit's Web port
1.
In standby mode, tap
2.
Tap "Basic Settings".
3.
Tap or to select "Other Option".
4. Tap "Other Option".
5. Tap "Embedded Web".
6. Select "Off", and then tap "OK".
16 Administrator Guide
HTTP/1.0 (RFC 1945), HTTP/1.1 (RFC 2616)
Digest
Microsoft Windows
®
Windows Internet Explorer
Internet Explorer 9, Windows Internet Explorer 10, Windows Internet
Explorer 11 web browser, Firefox
(37.0.2062.103)
English
or to select "Basic Settings".
or to select "Basic Settings".
7 or Windows 8 operating system
®
7, Windows Internet Explorer 8, Windows
®
(32.0.3), Google
®
Chrome™
®
Document Version 2016-05