Fitting The Round Spray Nozzle - WAGNER PEM-X1 Operating Manual

VERSION 03/2014
OPERATING MANUAL
8.6

FITTING THE ROUND SPRAY NOZZLE

2.
3.
4.
5.
6.
ORDER NUMBER DOC 2326020
P_01678
Procedure:
Note:
1. Before inserting the electrode holder, the spring
contact of the gun body and contact surface of
the electrode holder should be checked.
The spring contact must be clean and smooth-
running, the gun body must also be clean and
free of powder deposits.
2. Attach defl ector cone sleeve onto electrode holder.
3. Insert electrode holder into gun housing.
4. Slide union nut onto gun housing.
5. Screw union nut onto gun housing (hand-tight).
6. Slide defl ector cone over defl ector cone sleeve.
PEM-X1
42