Rectification Of Malfunctions - WAGNER PEA-C4-HiCoat FM Operating Manual

5.

Rectification of malfunctions

Malfunction
No electrostatic
(e.g. no wrap around or
no powder
adhesion)
Poor wrap around
Back spray
Powder outlet uneven
or inadequate
Spray pattern is
uneven
1.) You will find the wearing parts and spare parts in the operating instructions for the powder
injector.
28
Cause
- Fault in the high voltage
generator
- Electrical cable from spray
gun to control unit faulty
- Cascade in spray gun faulty
- Inadequate or no ground
- Soiling
- Powder sintering
- Feed device soiled
- Feed air / dosage air ratio
incorrect
- Wear on powder injector
nozzle
- Parts of nozzle system worn
0390882
-
PEA-C4-HiCoat FM
Rectification of malfunctions
Rectification
- Contact Wagner Service
- Replace electrical cable
- Contact Wagner Service
- See chapter
" Grounding "
- Blow through parts carrying
powder
- Clean parts carrying powder
- See operating instructions for
the related devices connected
- Adjust at control module
respective control unit
- Replace worn parts in the
powder injector 1.)
- Replace worn parts
05_Stoerung_C4.doc
01 / 2008