Connecting The Spray Gun - WAGNER PEA-C4-HiCoat FM Operating Manual

Preparing the spray gun
Nozzle
R28
R38
You will find the article numbers in chapter
2.2

Connecting the spray gun

Before you commence connecting the gun, switch off the high voltage generator. For informa-
tion on this activity refer to the related operating instructions for the control units and control
modules.
Hint
Use the parts listed in chapter
gun.
01 / 2008
Application
∅ 28 mm:
•
Medium sized, even workpieces
•
Lateral application with Z-axis
∅ 38 mm:
•
Large, even workpieces
•
Lateral application with Z-axis
9 " Accessories
0390882
-
PEA-C4-HiCoat FM
Distance to
workpiece
100... 300
100... 300
9 " Accessories ".
" for connecting and fastening the spray
Electrical connection
E
from control unit or
A
high voltage generator
Atomizing air
P
Powder feed
from powder injector
Ground spray gun
via the gun mounting
Powder output
[mm] [g/min]
50 ... 250
50 ... 250
Peac4_0003
11