4.2
Cleaning the spray gun and replacing the wearing parts
2
1
Caution
When pulling out and inserting the electrode holder, ensure that the insert is not
damaged!
•
Remove powder residue from the parts removed and from the spray gun.
Caution
Never place the spray gun or parts of the spray gun in cleaning agent!
•
Clean the parts removed and spray gun of powder residue.
•
As a rule you only need to check the protective wedge 4 for wear and replace it as
necessary.
In the next section it is described how the protective wedge is to be dismantled and inserted.
18
3
•
5
•
•
peac4_0005
0390882
Unscrew the outer nut 1 from the spray gun housing 5 .
Pull the fan spray nozzle 2 off the electrode holder 3 .
Carefully pull the electrode holder 3 out of the spray
gun housing 5 .
New protective wedge
Worn protective wedge:
•
We recommended replacing the protective
wedge
-
PEA-C4-HiCoat FM
Maintenance and cleaning
0402_Verschleissteile.doc
01 / 2008