Memory Full Error Occurs; Sent Fax Quality Is Poor - Epson WF-6590 User Manual

User's Guide
❏ Under the following conditions, the printer runs out of memory and cannot receive faxes. See the
troubleshooting for information on handling a memory full error.
❏ 100 received documents have been saved in the inbox.
❏ The printer's memory is full (100%).
Related Information
"Fax Settings" on page 33
&
"Cannot Send or Receive Faxes" on page 182
&
"Memory Full Error Occurs" on page 185
&

Memory Full Error Occurs

❏ If the printer has been set to save received faxes in the inbox, delete faxes you have already read from the inbox.
❏ If the printer has been set to save received faxes on a computer, turn on the computer that is set to save the
faxes. Once the faxes are saved in the computer, they are deleted from the printer's memory.
❏ If the printer has been set to save received faxes on a memory device, connect the device, in which you have
created a folder to save faxes, to the printer. Once the faxes are saved in the device, they are deleted from the
printer's memory. Make sure that the device has enough available memory and is not write protected.
❏ Even though the memory is full, you can send a monochrome fax by using the Direct Send feature. Or divide
your originals into two or more to send them in several batches.
❏ If the printer cannot print a received fax due to a printer error, such as a paper jam, the memory full error may
occur. Clear the printer problem, and then contact the sender and ask them to send the fax again.
Related Information
"Saving Received Faxes in the Inbox" on page 109
&
"Saving Received Faxes on a Computer" on page 110
&
"Saving Received Faxes in an External Memory Device" on page 110
&
"Sending Many Pages of a Monochrome Document (Direct Send)" on page 104
&
"Removing Jammed Paper" on page 162
&
"Replacing Ink Cartridges" on page 119
&

Sent Fax Quality Is Poor

❏ Clean the scanner glass.
❏ Clean the ADF.
❏ Change the Resolution setting on the control panel. If your originals contain both text and photos, select
Photo.
❏ Change the Density setting on the control panel.
❏ If you are not sure about the capabilities of the recipient fax machine, enable the Direct Send feature or select
Fine as the Resolution setting.
If you select Super Fine or Ultra Fine for a monochrome fax, and send the fax without using the Direct Send
feature, the printer may automatically lower the resolution.
❏ Enable the ECM setting on the control panel.
Solving Problems
185