Checking The Printer Status - Windows - Epson WF-6590 User Manual

User's Guide
Code Problem
421 A DNS error has occurred.
422 An authentication error has occurred.
423 A communication error has occurred. It is also
possible that a file with the same name is open or the
file is a read-only file.
425 There is not enough storage space available in the
forwarding destination folder.
428 The destination was wrong or the destination does
not exist.
Related Information
"Connecting to a Phone Line" on page 95
&
"Scan Mode" on page 24
&
"Fax Settings" on page 33
&
"Available Paper and Capacities" on page 40
&
"Using an Email Server" on page 215
&

Checking the Printer Status - Windows

1. Access the printer driver window.
2. Click EPSON Status Monitor 3 on the Maintenance tab, and then click Details.
Note:
If EPSON Status Monitor 3 is disabled, click Extended Settings on the Maintenance tab, and then select Enable
EPSON Status Monitor 3.
Related Information
"Windows Printer Driver" on page 144
&
Solving Problems
Solution
❏ Select Setup > System Administration >
Network Settings > Advanced Setup > DNS
Server, and then check the DNS settings.
❏ Check the DNS settings for the server, the
computer, or the access point.
Select Setup > System Administration > Fax
Settings > Output Settings > Fax Output > Other
Settings, and then check the settings of the folder
selected in Where to Forward.
❏ Check the network connection. See the Network
Guide for more details.
❏ Select Setup > System Administration > Fax
Settings > Output Settings > Fax Output >
Other Settings, and then check the settings of
the folder selected in Where to Forward.
❏ Close the file with the same name or disable the
read-only protection.
Increase the storage space in the forwarding
destination folder.
Select Setup > System Administration > Fax
Settings > Output Settings > Fax Output > Other
Settings, and then check the settings of the folder
selected in Where to Forward.
161