Epson WF-6590 User Manual page 99

User's Guide
8. On the Receive Mode Setting screen, select whether you want to receive faxes automatically.
❏ To receive automatically: Press Yes. Receive Mode is set to Auto.
❏ To receive manually: Press No. Receive Mode is set to Manual.
9. On the Confirm Settings screen, check the settings you made, and then press Proceed.
To correct or change settings, press the
10. Press Start to run the fax connection check, and when the screen prompts you to print the check result, press
x
the button.
A report of the check result that shows the connection status is printed.
Note:
❏ If there are any errors reported, follow the instructions on the report to solve them.
❏ If the Select Line Type screen is displayed, select the line type. When you are connecting the printer to a PBX phone
system or terminal adapter, select PBX.
❏ If the Select Dial Tone Detection screen is displayed, select Disable.
However, setting this to Disable may cause the printer to skip the first digit of a fax number when dialing and send
the fax to the wrong number.
Related Information
"Connecting the Printer to a Phone Line" on page 95
&
"Setting Receiving Mode" on page 106
&
"Making Settings for a PBX Phone System" on page 99
&
"Fax Settings" on page 33
&
Making Basic Fax Settings Individually
You can make fax settings without using the fax setting wizard by selecting each setting menu individually. The
settings configured using the wizard can also be changed. For more details, see the list of menus in fax settings.
Related Information
"Fax Settings" on page 33
&
Making Settings for a PBX Phone System
Make the following settings when using the printer in offices that use extensions and require external access codes,
such as 0 and 9, to get an outside line.
1. Enter Setup from the home screen.
2. Select System Administration > Fax Settings > Basic Settings > Line Type.
3. Select PBX.
4. On the Access Code screen, select Use.
Faxing
y
button.
99