Epson WF-6590 User Manual page 23

User's Guide
Menu Settings and Explanations
Layout With Border
2-up
4-up
ID Card
Document Size Select the size of your original.
Zoom Enlarges or reduces the original.
Select Auto Fit Page to fit to the paper size of the selected paper source.
Paper Source Select the paper source that you want to use.
Auto: Feeds paper automatically using the Paper Setup settings made when you loaded the paper.
Front Paper Feed Slot: Select the paper size and paper type you loaded in the front paper feed slot.
2-Sided Select 2-sided layout.
Select a layout, press Advanced, and then select the binding position of your original and the paper.
Document Select the orientation of your original.
Orientation
Quality Select the type of your original.
Text: Provides faster printing, but the printouts may be faint.
Photo: Provides higher quality printing, but the printing speed may be slower.
Density Set the density of your copies.
Layout Order Select the copy layout for multiple pages when you have selected 2-up or 4-up as the Layout
setting.
Remove Shadow Removes shadows that appear in the center of copies when copying a booklet or that appear around
copies when copying thick paper.
Remove Punch Removes the binding holes when copying.
Holes
Collate Copy Prints multiple copies of multiple originals collated in order and sorts them into sets.
Dry Time Select the drying time.
Advanced Settings Adjust image settings such as contrast and saturation.
Printer Basics
Copies with a border around the edges.
Copies multiple page originals onto one sheet.
When placing originals in the ADF, insert them into the feeder from the top or
left edge.
Load vertical originals as shown below, and select Portrait from Document
Orientation.
Load horizontal originals as shown below, and select Landscape from
Document Orientation.
Scans both sides of an ID card and copies onto one side of A4 size paper.
23