Epson WF-6590 User Manual page 87

User's Guide
Related Information
"Document Capture Pro" on page 147
&
"Setting the Operation Mode" on page 87
&
"Scanning Using the Document Capture Pro Settings" on page 87
&
Setting the Operation Mode
Before scanning, set the operation mode on the control panel to match the computer on which Document Capture
Pro is installed.
1. Enter Setup from the home screen.
2. Select System Administration > Document Capture Pro Settings.
3. Select the operation mode.
❏ Client mode: Select this if Document Capture Pro is installed on Windows or Mac OS X.
❏ Server mode: Select this if Document Capture Pro is installed on a Windows Server. Next, enter the server
address.
4. If you have changed the operation mode, check that the settings are correct, and then press Done.
Related Information
"System Administration" on page 29
&
"Document Capture Pro" on page 147
&
"Scanning Using the Document Capture Pro Settings" on page 87
&
Scanning Using the Document Capture Pro Settings
Note:
❏ Before scanning, install Document Capture Pro and make settings for the job.
❏ Before scanning, connect the printer and the computer (server) to the network.
❏ Before scanning, set the operation mode on the control panel.
1. Place the originals.
2. Enter Scan from the home screen.
3. Select Document Capture Pro.
4. Press Select Computer, and then select the computer registered to the job in Document Capture Pro.
Note:
❏ The printer's control panel displays up to 100 computers on which Document Capture Pro is installed.
❏ If you have selected Option > Network Scanning Settings, and enabled Protect with password in Document
Capture Pro or Document Capture, enter a password.
❏ If Server mode is set as the operation mode, you do not need to perform this step.
Scanning
87