Setting Print Mode; Setting Of The Print Quality - MIMAKI TS3-1600 Operation Manual

Setting print mode

Upon the setting of the print mode, set each item for printing as follows.
• Print quality (DRAFT) : Setting the print quality in the DRAFT mode (Resolution in the scanning
• Print quality (FINE)
• Scanning direction
• Logical-seek
• WhiteLay Print

Setting of the print quality

1
Press the
2
Press the
3
Select the type (1-4) by pressing the
then press the
4
Select [PRINT MODE] by pressing the
5
Press the
6
Select an item to be set.
(1) Select [DRAFT QUALITY] or [FINE QUALITY] （[DRAFT QUALITY] is selected here.） by
pressing the
(2) Press the
7
Select the print quality by pressing the
• Set value : STD / FAST / FINE
• Press the
3-12
direction: 540dpi)
: Setting the print quality in the FINE mode (Resolution in the scanning direc-
tion: 720dpi)
: Setting the printing direction
: Setting "ON/OFF" of Logical-seek
: Setting the way of print with other colors after printing with SS21 white ink
key in the local mode.
key.
key.
keys.
key.
keys.
key.
keys.
key to terminate the setting at this then proceed to the step10.
F UNC T I ON
S E T UP < EN T >
S E T UP
S E L EC T : T Y PE . 1
keys
[ 1 ]
PR I N T MODE < e n t >
[ 1 ] PR I N T MODE
DRA F T QUA L I T Y < e n t >
[ 1 ] PR I N T MODE
DRA F T q u a l i t y : S T D .