Setting Print Mode; Setting Of The Print Quality - MIMAKI JV33-160 Operation Manual

Setting print mode

Upon the setting of the print mode, set each item for printing as follows.
• Print quality (DRAFT) : Setting the print quality in the DRAFT mode (Resolution in the scanning
• Print quality (FINE)
• Scanning direction
• Logical-seek
• WhiteLay Print

Setting of the print quality

Press the
1
mode.
Press the
2
Select the type (1-4) by pressing the
3
then press the
Select [PRINT MODE] by pressing the
4
Press the
5
Select an item to be set.
6
Select the print quality by pressing the
7
3-12
Downloaded From ManualsPrinter.com Manuals
direction: 540dpi)
: Setting the print quality in the FINE mode (Resolution in the scanning direc-
tion: 720dpi)
: Setting the printing direction
: Setting "ON/OFF" of Logical-seek
: Setting the way of print with other colors after printing with SS21 white ink
(Usable on Firmware Ver. 1.30 or later)
key.
keys.
key.
(1) Select [DRAFT QUALITY] or [FINE QUALITY]（[DRAFT QUALITY] is selected here.） by
pressing the
(2) Press the key.
keys.
• Set value : STD / FAST / FINE
• Press the key to terminate the setting at this then proceed to the step10.
key in the local
key.
keys.
F UNC T I ON
S E T UP < EN T >
S E T UP
S E L EC T : T Y PE . 1
keys
[ 1 ]
PR I N T MODE < e n t >
[ 1 ] PR I N T MODE
DRA F T QUA L I T Y < e n t >
[ 1 ] PR I N T MODE
DRA F T q u a l i t y : S T D .