Setting Print Mode; Setting Of The Print Quality - MIMAKI JV33-260BS Operation Manual

Setting print mode

Upon the setting of the print mode, set each item for printing as follows.
• Print quality (DRAFT) : Setting the print quality in the DRAFT mode (Resolution in the scanning direction:
• Print quality (FINE)
• Scanning direction
• Logical-seek

Setting of the print quality

1
Press the
2
Press the
3
Select the type (1-4) by pressing the
then press the
4
Select [PRINT MODE] by pressing the
5
Press the
6
Select an item to be set.
(1) Select [DRAFT QUALITY] or [FINE QUALITY]([DRAFT QUALITY] is selected here.) by pressing
the
(2) Press the
7
Select the print quality by pressing the
• Set value : STD / FAST / FINE
• Press the
8
When changing the details of printing quality at each resolution.
Select the resolution by pressing the
• Set value : 540x720, 540x900, 540x1080 dpi (When "DRAFT" is selected)
(1) Select the resolution by pressing the
(2) Press the
3-12
540dpi)
: Setting the print quality in the FINE mode (Resolution in the scanning direction: 720dpi)
: Setting the printing direction
: Setting "ON/OFF" of Logical-seek
key in the local mode.
key.
key.
key.
keys.
key.
key to terminate the setting at this then proceed to the step10.
720x540,720x720,720x1080,720x1440 dpi (When "FINE" is selected)
key.
F UNC T I ON
S E TUP
S E TUP
S E L EC T
keys
keys.
[ 1 ]
PR I N T MODE
[ 1 ] PR I N T MODE
DRA F T QUA L I T Y
keys.
[ 1 ] PR I N T MODE
DRA F T q u a l i t y :
[ 1 ] DRA F T QUA L I T Y
5 4 0 x 7 2 0
key.
key.
< EN T >
: T Y P E . 1
< e n t >
< e n t >
S TD .
< e n t >