Loading Mibs - HP procurve 8100fl series Management And Configuration Manual

C a u t i o n

Loading MIBs

The order in which you load MIBs into an application is important. The
following MIB modules should already be loaded (so you do not have to):
■ SNMPv2-SMI
■ SNMPv2-TC
SNMPv2-CONF
■
■ SNMP-FRAMEWORK-MIB
Some of the following list of IETF standard MIB modules may already be
loaded, so you do not need to load them again (unless they are newer
versions). Load them in the order shown—with the HP Switch proprietary
MIB module at the end.
Do not inadvertently overwrite an older version of a MIB module with a newer
one without first backing up that module. Devices from other vendors that
support older versions, may not work with the newer version of the module.
■ SNMPv2-MIB
IF-MIB
■
■ IP-MIB
■ TCP-MIB
UDP-MIB
■
■ IP-FORWARD-MIB
■ ENTITY-MIB
HP-SWITCH-FL-SERIES-INVENTORY-MIB
■
SNMP Configuration
Configuring Access to MIB Objects
18-7