Configuring Authorization; Configuring Login Prompts - HP procurve 8100fl series Management And Configuration Manual

Security Configuration
Configuring Authentication
5-12
The parameters can be used as follows:
■ The group option allows you to use the default RADIUS or TACACS+
server group.
The group name option allows you to specify a defined server group.
■
Specify enable to set up an authentication method list for Privileged Exec
■
mode.
Specify line to use a line password.
■
Specify none to bypass authentication.
■

Configuring Authorization

To restrict network access for individual users, enter the following command
in Configuration mode:
ProCurve(config)#aaa authorization {commands <priv-level> |
exec} {default | listname} [group {radius | tacacs+ | group-
name}]... [if-authenticated | none]
The parameters can be used as follows:
■ Specify a command and privilege level (see
authorization for individual commands.
Specify default to apply a default authorization list—the listname option
■
allows you to specify a defined authorization list.
■ The group and group-name options allow you to use defined RADIUS or
TACACS+ server groups.
Specify if-authenticated to authorize if authenticated.
■
Specify none to bypass authentication.
■

Configuring Login Prompts

To configure the user login prompts for user name and password, enter the
following commands in Configuration mode:
Table 5-1.

Configuring Login Prompts

Command
ProCurve(config)#aaa authentication
username-prompt <prompt>
ProCurve(config)#aaa authentication
password-prompt <prompt>
page 5-8) to check
Action
Configure the login user
name prompt
Configure the login
password prompt