Vrrp Configuration With Two Routers - HP procurve 8100fl series Management And Configuration Manual

VRRP Configuration
Configuring VRRP
N o t e
Master for VRID=1
Backup for VRID=2
VLAN = 15
Interface Addr. = 10.0.0.1/24
= 11.0.0.2 secondary
VRID=1; Addr. = 10.0.0.1
VRID=2; Addr. = 11.0.0.1
Default Route = 10.0.0.1/24
16-8

VRRP Configuration with Two Routers

Figure 16-2 shows a symmetrical VRRP configuration with two routers and
two virtual routers. Routers R1 and R2 are both configured with two virtual
routers (VRID=1 and VRID=2).
Router R1 serves as:
Master for VRID=1
■
Backup for VRID=2
■
Router R2 serves as:
Master for VRID=2
■
Backup for VRID=1
■
This configuration allows you to load-balance traffic coming from the hosts
on the 10.0.0.0/24 subnet and provides a redundant path to either virtual router.
This symmetrical configuration is the recommended configuration on a
network using VRRP.
R1
VRID=1
10.0.0.1
H1 H2
Figure 16-2. Symmetrical VRRP configuration
Master for VRID=2
Backup for VRID=1
R2
VRID=2
VLAN = 15
Interface Addr. = 11.0.0.1/24
11.0.0.1
VRID=1; Addr. = 10.0.0.1
VRID=2; Addr. = 11.0.0.1
H3 H4
Default Route = 11.0.0.1/24
= 10.0.0.2 secondary