HP procurve 8100fl series Management And Configuration Manual page 27

N o t e
N o t e s
For more information on the CLI Access modes and permissions, see
Table 2-1 on page
2. To access the Privileged Exec mode from the Exec mode, enter:
ProCurve>enable
You will be prompted for a password if one has been assigned. Otherwise,
the prompt will change to the Privileged Exec mode (#):
ProCurve#
From Privileged Exec mode, you can manage system-level functions and
enter Configuration mode to make configuration changes.
3. To access Configuration mode, from Privileged Exec mode enter:
ProCurve#configure
The prompt will change to Configuration mode:
ProCurve(config)#
From Configuration mode, you can reach all other configuration levels
(for ports on interface modules, for specific protocols, and so on) from
this mode.
The CLI supports partial matching, so you do not need to enter the entire
name of a command or option.
CLI commands are not case sensitive.
To help identify the current command level or mode, the CLI prompt
changes at each level of the Configuration command structure.
2-4.
Using the Command Line Interface (CLI)
Accessing the CLI
2-3