Managing System Devices And Software; Determining Software Versions - HP procurve 8100fl series Management And Configuration Manual

Managing System Devices and Software

This section highlights some key commands used to manage hardware and
software on the switch. For complete information and procedures on updating
system software and Boot ROM images to the most current versions, refer to
the latest Release Notes, available on the ProCurve Networking Web site.

Determining Software Versions

To display the software versions running on the 8100fl switch and modules,
enter the show version command:
ProCurve#show version [{all-modules | fabric-module |
interface-module | licenses | management module | summary }]
The parameters allow you to view detailed version information for all installed
modules, for different module types, and/or for specific individual slots.
The following example shows how to display summary version information
for all installed modules (the default) by entering the show version command
without specifying any additional parameters.
ProCurve#show version
ProCurve Networking Switch 8100fl Series System Software
Version CY.02.02.0051
Copyright (c) 1998-2005 by ProCurve Networking.
Compiled on Sun Jan 22 20:20:26 PST 2006
Bootloader Version CY.02.02.0004
Switch uptime is 18 hours, 4 minutes, 28 seconds
System restarted by cold reset
System image file is ms-CY.02.02.0051.ver
ProCurve 8108fl chassis
1 Management-Module
2 Fabric-Module(8108fl)s
1 Std 10 Port 1G Fiber SFP
1 Std 10 Port 100/1G Copper
1 Std 1 Port 10G-LR
2 1 Port 10G-X2s
ProCurve#
File and System Management

Managing System Devices and Software

3-9