Debug Commands - HP procurve 8100fl series Management And Configuration Manual

N o t e
All the show commands are accessible at the Privileged Exec mode. Many
show commands are accessible from various configuration modes, and a
limited number of show commands are available at the Exec mode level.

Debug Commands

To gather information on selected processes and to control tracing, enter the
following commands from the Privileged Exec mode:
Command
debug aaa
debug ip ospf
debug multicast-helper
debug mulicast-manager
debug radius
debug spanning-tree
debug tacacs
debug vrrp
Function
Gather debugging information and statistics on
Authentication, Authorization, and Accounting (aaa)
Gather debugging information on OSPF. See
Commands" on page 13-20
Gather debugging information on multicast-helper.
Gather debugging information on multicast-manager events
and packets.
Gather Remote Access Dial In User Service (RADIUS)
protocol information
Gather debugging information on spanning-tree.
Gather Terminal Access Controller Access Control System
(TACACS+) protocol information
Gather Virtual Redundant Router Protocol (VRRP) debug
information
Performance Monitoring
Debug Commands
"OSPF Debug
for a list of commands.
19-5