Wireless vdsl2 router with asdl2+ support (168 pages)
Summary of Contents for D-Link DSL-G255
D-Link N300 DSL-G255 FTTP/FTTC/HFC Installation Guide D-Link N300 DSL-G255 1. Connect your computer to the router via a wired or wireless connection. Launch a web browser and type in 192.168.1.1 The default username and password will be admin and admin.
Step 1 Step 1 When the Welcome screen appears, click Next to start wizard.
Step 2 Step 2 Enter Current Password (admin) and New Password then Confirm New Password to secure your modem router, click Next to continue.
Step 3 Step 3 Select your Time Zone from the list, click Next to continue.
Step 4 Step 4 Select your Wan Service type = ETH WAN, Country = Australia, Internet Service, Protocol = PPPoE. Now enter your Username and Password as provided by FiberMax®. Click on Next and continue.
Step 5 Step 5 Enter a new Wireless Network Name (SSID) for this modem router. Select the security method that you wish to use for your wireless networks, click Next to continue, FibreMax® recommends that you select BEST. Click Next to continue.